Mods on the E1 MP5 PDW

I have the E1 MP5 PDW and the metal connector on the wire that attatches to the motor snapped. First, where could i get a replacement? Second, right now it shoots fairly hard for a CQB gun and it doesn't have a very good ROF. I know that putting in a lighter spring would help, any suggestions on the spring and other upgrades I should do for it to make it a better CQB weapon?

You can get the motor tabs at radio shack.

Put in a lighter spring, reshim, add high speed gears, new motor, rewire and add deans plugs, polish the gearbox, better battery, etc will all up the ROF.

This battery is good: http://www.airsoftgi.com/product_info.php?cPath=27_46&products_id=3594 or this one: http://www.trinityairsoft.com/p-1010-battery-96v-1400mah-nimh-stick-intellect.aspx ,but with the second one you need to mod the charging handle to put it in.

tommyboy wrote:

I have the E1 MP5 PDW and the metal connector on the wire that attatches to the motor snapped. First, where could i get a replacement? Second, right now it shoots fairly hard for a CQB gun and it doesn't have a very good ROF. I know that putting in a lighter spring would help, any suggestions on the spring and other upgrades I should do for it to make it a better CQB weapon?

Same exact thing happened to me! The stock wires suck, new ones would be great, but rewiring isnt fun (for an electric nub altleast). You can probably just resolder the motor connecters...that is what I am going to try to do first.

For the battery, you would need to shorten the charging handle?
and for the connectors, would I be better off soldering it, getting new connectors, or completely rewiring it.

Second, I let my little brother borrow it for a game and he lost on of the pins that attaches the folding stock to the gun, will this pin work?

http://www.airsoftgi.com/product_info.php?cPath=30_111&products_id=97

If not, do you know of where i could get one?

Umm its a little shorter than the Galaxy pin by about a millimeter or 2. So it might fit.

For the larger battery you will need to cut the charging handle to make it fit. Here is a video that will help: https://www.youtube.com/watch?v=jK-bgKQK2Co