galaxy Mp5k Pdw

My MP5k Pdw doesn't shoot for some reason
The gearbox is running and i hear the motors but no bbs r coming out
The mag works so im pretty sure its not the problem

I think that a few bbs r stuck in the gearbox or something (the unjamming tool doesn't get anything out so im not totally sure)

What should i do????
take it apart?

Take out the mag and turn the gun upside down. Look into the feed nozzle and verify that the air nozzle is moving back and forth when shooting. If not, take it apart. If it is moving, then (with no bbs in the gun and safety glasses on) shoot at a piece of tissue paper or other light material and ensure that it's shooting air out of the barrel. If not, take it apart, your compression is gone. If it is, then try a different magazine. If that doesn't work, then take it apart and look for anything obviously wrong.

My Galaxy mp5k stopped shooting too...I messed with it and a BB flew out of the magwell into my hand. I then took the gun apart and found there was a BB jamed in my hop up. I took the BB out and now when I put the gun back together the motor will just click, but the gun doesn't fire...sorry to sorta hijack the thread but anyone have any ideas as to why the gun won't fire? When I pull the trigger you just hear a *click*, but nothing happens. I'm going to fully dissasemble it and see if there is anything noticeable.

to booligan

the motor runs and i see the air nozzle moving back and forth
it is also shooting air but when i put in the mag, it continues to blank fire

newbatairsoft

My problem is very similar to yours except the motor runs smoothly but no shots r coming out

newbatairsoft, i had the same "click" problem with my E1 mp5 pdw and all that i did was charge up the battery and shoot it on full auto for a couple of shots and it seemed to work fine.

hey do u guys no how 2 take off the fire switch selector?
I'm in the middle of dissembling it and got stuck with the fire switch selector part

if u know how to take it off please tell me thanx

This video shows how:

http://www.mechbox.com/mp5/mp5j-disassembly

godofgun, I DID have the EXACT same problem you had...until I unjammed it...then I got the "click problem"...

To take of the selector switch off take out the little screw beneath one of the selectors, than take it off. Then pull the other selector out the other side. Go on youtube and look at airsofthawaii's mp5k videos, he shows how to do it.

Tommyboy, thank you so much, I will try that out!

maybe you stripped the gears (@ newb)

Why don't you just take the gearbox out and go from there?

tommyboy
the video is about the mp5j by TM, i have the galaxy mp5k so i dunno if the insides r the same (but ill give it a try)

also newbatairsoft
i did check out airsofthawaii's vids before i asked this on airsoft reports
i got the little screw off but the selector still wont come off??
wonder what the problem is

okay, so it's set up like this:

http://www.airsoftatlanta.com/images/tm_mp5_selector_jpg.jpg

On the right selector your removed the tiny black screw...so it should come right off.

If it isn't falling off as soon as you removed that screw, then I'm guessing it is glued (wierd). Do you see any glue in there?

i cant see any but now u mention it, im think its glued
what were they thinking?

They were thinking that people didn't want them falling off, lol.

Darn you galaxy for making a gun that doesn't fall apart

Just pull on it. Glue isn't THAT strong.

lol
should i rip it off or just send it back to airsplat and let them do the dirty work?

lol, they won't do any dirty work. They'll confirm that it's broke, throw it away, and send you a new one.

If it's still in the warranty, go for it, but if you want to use this experience to learn about the inside of your gun, then pull that sucker off and get it fixed.

Just pull it off imo...It's not gunna break.

ok i dissembled it but there is a little gold tube that fell out when i took out the gearbox
Where is it suppose to go?

Sounds like the reinforcement tube on the magazine release. Look in the slot on the body where the mag release lever is, and see if it fits in there.

is this still in the gearbox or can i fit it in exterally (since i already got it back together)
also without this piece would the gun malfunction?

GodofGunX wrote:

is this still in the gearbox or can i fit it in exterally (since i already got it back together)
also without this piece would the gun malfunction?

Externally. It's part of the hinge for the magazine catch. Without it the mag release lever may be harder to push.

k thanks
but somehow the fire selector switch got loose and i thought it may be because of the little gold tube

Shouldn't be. It sounds just like the mag release piece.

hmmm im not sure
it doesnt seem like there's anything u can put it on the outside
It's small and gold and is heavily lubed so could it be something from the inside

lol i really hope my gun doesnt blow up without that piece

I need a pic to determine the size of it.