What length of barrel does the JG G3 SG1 take?

I know I am posting a lot, but yeah......


thanks guys


Systema has a barrel for the G3 and it says 497mm, but an M16 barrel is 506mm.

Are m16 barrels longer?

^I think you answered your own question there.

lol

I was wanting to get a madbull, but they don't seem to have G3 length.

So get the next closest one. The barrel doesn't go all the way through the flashhider on the G3, so you could get away with putting a 509mm M16 one in it. The inner barrel shouldn't stick out very much, if at all. If it does, you can cut it off with a hacksaw or dremel tool, deburr it, and recrown it pretty easily.

You could also cover it up with a silencer.

^That's how I roll:



It doesn't do good things for my ego to have a gun that's nearly 5' long. Makes it look like I'm compensating for something, lol...

That looks good except for the icky plastic body . How do you think this would work in the JG. I showed it to stealth because he likes the look of G3's he just wants one that performs like a KWA.

Meh, way overpriced for what it is. Element parts are just as good in my opinion, and are 1/5 the price.

Why spend more on some very basic internal parts then you did on the gun, you know?

And the plastic body isn't that bad actually. THere's no barrel wobble, unlike the Marui which seems like it is about to snap in half at any given moment, lol...

Element parts?

where can I buy a whole tune up kit?

ASGI doesn't carry them

Stealthmasterairsofter14 wrote:

Element parts?

where can I buy a whole tune up kit?

ASGI doesn't carry them

Learn to shop outside of just ASGI They don't have everything you know, lol...

Look at ehobbyasia, as well as a few overseas shops. Total price is about $40 and they're great kits.

I know lol (I want to order from the same place though)

Have you used them before? Are they really as good as systema? I don't want to have the parts crap out on me later on.

http://cgi.ebay.com/ELEMENT-Original-Type-Gear-Full-Tune-Up-Kit-IN0900A-V2_W0QQitemZ270247585049QQihZ017QQcategoryZ31681QQtcZphotoQQcmdZViewItemQQ_trksidZp1713.m153.l1262

is this what you are talking about?

I want something that will last a long time while maintaining an M120.

Also, ehobbyasia doesn't have the element tappet plate.

what brand of tappet plates do you recommend?

I've used element FTK's before, I like them better than systema personally. Why spend extra money and not get that much extra quality.

okay thanks

what brand of tappet plate do you recommend?

I've never had a reason to get any one other than a stock one. Unless you have a catastrophic jam (which won't happen if you're using good BBs and maintaining your gun) and it gets jammed up and breaks, then it should be fine.

ASGuy's P90 tappet plate is the first one other than my AGM M14 that I've heard of breaking under normal use. My whole AGM was one problem after another, with the tappet plate being just another thing to replace. I replaced it with a stock one FYI.

okay thanks

ASguys P90 was upgraded with just an m110 though, nothing else.