Echo1 m14 UPGRADES

What would be good to buy to up grade my Echo1 m14 Socom.

I am just going to say it. There is no point in upgrading an Echo 1. With all of the money you will have put into it, you could have bought a G&G m14 for $250. I say save for a new gun.

Yes, but he already has it, so there is no point in not upgrading it.

I would get a tight boar barrel, and an M110 spring.

well, since he already owns the gun, who not upgrade it? I mean theirs no point getting another gun. Unless he wants another one.

to add to the tightbore that Airsoftguy suggested, you could alos get a new motor, though dont get something too fancy, your gears may not be able to handle it.

You also might want to get metal bushings and metal spring guide.

Captain Crunch wrote:

You also might want to get metal bushings and metal spring guide.

I believe it already has those, but I may be wrong.

Get a tightbore for sure. IDK what else though

I don't think it comes stock w/ metal bushings and spring guide.

is the tight bore nessisary???and about what will this all cost

Is it necessary? No upgrades are necessary, it just depends on what you want to imporve on your gun. Which btw, what would you like to improve?

i want more distance, but still maintain accurecy

Well then, that's pretty much a tight bore's job! lol

then a tightbore will be necessary. It probably the only thing you'll need to upgrade, to get the improvements you want.

im not sure what size the barrel should be, or if the G&G has the same sized barrel as the TM, so ask a retailer before buying, just to make sure.

http://trinityairsoft.com/p-212-barrels-tighbore-by-km-head.aspx

THis message is brought to you by omd

The best upgrades for these guns are:
Guarder FTK:
http://cgi.ebay.com/Guarder-M14-Airsoft-AEG-SP120-Full-Tune-Up-Kit-G-FTK-46_W0QQitemZ270199777619QQihZ017QQcategoryZ64635QQtcZphotoQQcmdZViewItem#ebayphotohosting

and


Guarder infinite torque motor(close to being equal to systema magnum)
http://cgi.ebay.com/Guarder-Airsoft-INFINITE-Torque-Up-Motor-SHORT-GE-01-11_W0QQitemZ290199681012QQihZ019QQcategoryZ64635QQtcZphotoQQcmdZViewItem

also search for a 440mm tightbore barrel and look for a new hopup bucking, which will be for TM M14s.

thats a bit to much money...But adding a tight bore will increase accuracy, range and power/fps???

Yep. It does all that. Its kind of like the buy one get one free of the airsoft upgrade world. Here is how it does that:

A bb inside a barrel, will bounce in the barrel: /\/\/\/\/\/\. Now, because a tight boar is much tighter, the BB does not have as much room to bounce, and will be more accurate. Now, if it is more accurate, you USUALLY have more range. Maybe not more maximum range, but you will be able to hit targets farther away, so you EFFECTIVE range will be greater.

It gives more FPS because the air seal is tighter, so the compressed air does not have as much room to escape around the BB. because the BB is now going faster, it could extend you maximum range.

Yeah, think about those in a systema, who cares I wont buy one kit, back to the topic, I think that you might want to spend a larger amount of money, to replace the gear box, since the echo 1 gear box, (internal box, more like compartments) is easily broken or messed up, and is better if you get a whole new one, which will save you money for other stuff

but a tightbore is also a good idea

so what type of gearbox should i get and tight bore...

well... there are tons, these are all pretty expensive, but very good, and reliable mechbox parts, and full mechboxes, just look for yourself here
http://www.airsoftextreme.com/store/index.php?main_page=index&cPath=443_444
thats the link for AEXs airsoft parts, buy from here it is a trusted to give you top quality parts, it is also my walk in store
for tight bores...
well I checked AEX, but they dont have any for the M14, maybe I can get them to special order it...