TSD L96 upgrades

Hey I'm going to get the TSD L96 and i was wondering what upgrades i should put on it. I'm on a tight budget so keep that in mind. I'm not sure ,so I would like to know what you guys think I should do.

well im no geniouse but for a sniper a tight bore barrel and better spring sound like a good idea

Do you know of any cheap brands?

Uh.... a good tightbore is around $50

Yea, on Airsoftgi i found this http://www.airsoftgi.com/product_info.php?cPath=31_55&products_id=3201
i think it should fit ,but i couldn't find the right spring.

im not sure but this might work
http://www.airsoftextreme.com/store/index.php?main_page=product_info&cPath=443_465_467&products_id=1399

How much harder will it become to pull the bolt back because i don't want to be killing my arm and what type of range and FPS do you think i will get from the tight bore and M210 spring (if it works right)?

^The 210 spring will cause the trigger box to crack, the piston to strip at the sear catch, and the sears to more or less explode, along with killing the cylinder most likely as well.

Don't go higher than an SP150 on that gun, unless you install a zero trigger.

Here's my suggestion:
Get the barrel you linked.
Wash the stock bucking, and let it air dry.
Don't touch any bbs lighter than .30g.

You should be getting torso accurate shots out to 250' or so, depending on how well you can shoot to begin with. Don't hop into hot springs unless you are prepared to dish $300-$800 worth of other parts, because stuff will start destroying itself very quickly.

Booligan wrote:

^The 210 spring will cause the trigger box to crack, the piston to strip at the sear catch, and the sears to more or less explode, along with killing the cylinder most likely as well.

Don't go higher than an SP150 on that gun, unless you install a zero trigger.

Here's my suggestion:
Get the barrel you linked.
Wash the stock bucking, and let it air dry.
Don't touch any bbs lighter than .30g.

You should be getting torso accurate shots out to 250' or so, depending on how well you can shoot to begin with. Don't hop into hot springs unless you are prepared to dish $300-$800 worth of other parts, because stuff will start destroying itself very quickly.

Yeah I was wondering if a stock sniper can handle that strong of a spring without exploding..........

Yea when I looked at the 210 spring at 600 fps I thought that there was no way that the gun could take that without extensive upgrades. So I will get the barrel I linked and the SP150 spring. I'll clean the stock bucking and use .30+ BBs. Thanks for all the help.

I was thinking with these upgrades to like 530 fps w/.2 can the gun's stock parts hold up to that or will I need to get other things?

^Shoot, my Warrior 1 L96 shoots 550 with .20g stock. I think the TSD is a rebrand of the Warrior 1, so it should shoot near there out of the box.

It shoots at like 470 fps because it is the same as the Well version. I had concerns because the trigger box is plastic. And may I ask where did you find the Warrior 1 L96 because 550 fps stock is quite impressive.

My local shop has the warrior, is it any good?

Well the version booligan has looks good and the Well/TSD/UTG version is also good ,but could use some upgrades (spring, tightbore).

I got my Warrior from Gunner in HK, before L96s started pouring into the country, lol...

I'm not familiar with gunner or what HK means can you please elaborate.

Gunner: Gunnerairsoft.com

HK: Hong Kong. officially the Hong Kong Special Administrative Region, is one of the two special administrative regions of the People's Republic of China, the other being Macau. The territory lies on the eastern side of the Pearl River Delta, bordering Guangdong province in the north and facing the South China Sea in the east, west and south. Beginning as a trading port in the 19th century, Hong Kong has developed into a leading financial centre.

Hong Kong was a dependent territory of the United Kingdom from 1842 until the transfer of its sovereignty to the People's Republic of China in 1997. The Sino-British Joint Declaration and the Basic Law of Hong Kong stipulate that Hong Kong operate with a high degree of autonomy until at least 2047, fifty years after the transfer. Under the policy of "one country, two systems", the Central People's Government is responsible for the territory's defence and foreign affairs, while the Government of Hong Kong is responsible for its own legal system, police force, monetary system, customs policy, immigration policy, and delegates to international organisations and events.


That should be elaborate enough for ya, lol

Yea that explains it pretty well thanks .

wow thats pretty impressive

Hey would gunnerairsoft.com be a good place to buy the Well L96 http://www.gunnerairsoft.com/catalog/product_reviews.php?cPath=45&products_id=425&page=2 And the different names like Mbo1c is the same as Mbo1A except for the accessories and color right? Also, how is the shipping on this website?

Just a little reminder for ya, when you copy and paste links, they will automatically become hyperlinks, so you dont have to push the "link" button.
-Sgt. Hartwig

no get it from airsplat or something. Gunner airsoft will cost a arm and a leg to ship. Trust me its a over seas dealer.

Alright I looked and Airsoftgi has it with no shipping so that's where I'll buy it from.

Are you going to buy the upgrades from there to??

I can buy the barrel and the gun itself from there ,but the only place I could find the right spring was on airsoft extreme.